The device is developed for protection of police and special services subunits, convoys, police and combat vehicles against threats of possible terroristic acts with use of radio controlled improvised explosive devices (RCIEDs).

The device provides reliable blocking (jamming) radio controlled detonating fuses, when they can be actuated by coded radio signal transmitted in 20...2700 MHz frequency range.

Frequency range 20...2700 MHz
Integral output power 200 W

The device is fabricated in one case that can be placed in a car boot (or compartment). The device is powered from vehicle onboard network 12V or 24V. It can be controlled by special wire remote controller from passenger compartment. The set of antennas with special dismountable magnetic mounts is placed on the car roof.

Due to applied technology “OptiJam”®, the emitted signal of the device has high spectral density that allows to increase significantly the radius of blocking and at the same time to keep radio emission level nonhazardous for personnel.

The built-in automatic diagnostics system controls performability of all nodes and units. In case of emergency sound and visual alarm signal appears on the wire remote controller indicating faulty unit or node. Amplifier units will be switched off automatically for their safety in case of any damage happened to antennas or antenna cables.

Special features

  • vehicular wideband bomb jammer
  • application of “OptiJam” technology
  • power supply from standard vehicular onboard network
  • easy mounting and dismounting from the vehicle; antennas with magnetic mounts
  • built-in digital diagnostics system with alarm about malfunction
  • constructional execution is in compliance with military standards
Technical specifications
Frequency range 20...2700 MHz
Integral output power 200 W
Continuous operation time from mains supply unlimited
Forming of jamming signal digital (PLL+FPGA)
Vehicle power supply 12/24 V
Operational temperature range −40…+60 °С
Dimensions 505 × 455 × 85 mm
Mass not more than 19,0 kg

Integral output power is measured at impedance 50 ohm. The device has All Union State Standard (GOST P and hygienic certificates. The device is manufactured in compliance with ISO 9001, MIL STD 810F and IP 65.