The system was developed to detect and defeat any kind of unmanned aerial vehicle (UAV), from micro-drones to large UAVs (micro-drones, drones, UAVs, paragliders, aircrafts). The system is very important to protect cru-cial infrastructures and objects like government premises and areas; military bases; VIP residences; border pro-tection; prisons protection against smuggling weapons, drugs etc where the UAVs should be detected at a large distance. Micro-drones are typically detected at distance between 2-4 km.

Frequency ranges GNSS (Global Navigation Satellite Systems (L1, L2, L3) 50 or 100; 430-440; 459-461; 868-870; 902-928; 2400-2490; 5700-600/50 or 100 MHz

The system consists of 2 independent modules, which can work together.

  1. Radar module for UAVs detection.
  2. Jammer module for countermeasures


Main features of radar module for UAVs detection

  • Long range radar system with detection range up to 6 km
  • 360 degrees coverage
  • Automatic tracking of multiple detected objects
  • Pan-Tilt-Zoom thermal/colour camera for identification of detected objects (optional)
  • Automatic tracking of multiple detected objects by camera (optional)
  • Cooled ot un-cooled thermal imager


Specifications of radar module

  • Frequency band: KU
  • Output power: 2W
  • Azimuth coverage: 360 degrees
  • Scan rate: 60 rpm
  • Minimum target size: 0.006 sq. m.
  • Software options: visualization, recognition and multiple target tracking, recording.


Camera system

  • Thermal camera: uncoiled micro bolometer 640×480. Fixed 100 mm. Double field of view 60/180 mm. Zoom: 28-225 mm.
  • Colour camera: CMOS 3.2 Mpixel, 30x zoom. CCD 8 Mpixel, 10x zoom (100-1000 mm).
  • Pan and tilt: Azimuth 360 degrees continuous. Elevation +20 to −30 degrees. Max. speed: 60 degrees/sec.



  • GPS coordinates, velocity, radar cross section, range, angle, time integration of multiple sensor sources.
  • User defines fences.


Main features of jamming module

  • Remote control frequency jamming: coverage of all available civil drones
  • Variable output power to block drones from 100 m to several km
  • Omnidirectional or directional antennas
  • Directional high-gain antennas mounted on Pan-Tilt platform to follow the drone (track) and to transmit the jamming signal in the direction of the UAV (drone).
  • Pan-Tilt platform with antennas interfaced with the radar or camera system (optional)
  • Frequency jamming can be done automatically upon UAV detection or upon supervisor assistance.


Specification of jamming system

  • Frequency bands, MHz/ output power, W: GNSS (Global Navigation Satellite Systems (L1, L2, L3) 50 or 100; 430-440; 459-461; 868-870; 902-928; 2400-2490; 5700-600/50 or 100
  • Note. Frequency bands and output power can be customized in compliance with customer needs.
  • Power supply: 24-28 VDC, 110-220 VAC


Antenna system

  • Directional: high-gain 10-15 dbiC (depending on band). Circularly polarized, mounted on Pan-Tilt planform
  • Omnidirectional: 2-4 dbi gain, depending on antenna type and frequency band.


Physical and environment

  • Dimensions, mm: 500×500×400 without antenna, depending on configuration
  • Weight, kg: 20-35, depending on configuration
  • Protection: IP65
  • Operating temperature, °C: −40...+50
  • Storage temperature, °C: −40...+80

The user may choose between 2 jamming modes: continuous/ manual jamming and automatic jamming upon UAV detection by radar or thermal imaging.

The detected UAV may be tracked visually by the thermal camera or with an external PTZ camera. The tracking allows, in combination with the directional antenna mounted on a pan-tilt platform to position the jammer antennas directly onto the detected drone in order to transmit the jamming signal precisely and focused into the drone detection.

Technical specifications
Frequency ranges GNSS (Global Navigation Satellite Systems (L1, L2, L3) 50 or 100; 430-440; 459-461; 868-870; 902-928; 2400-2490; 5700-600/50 or 100 MHz