Perseus-102

The device is developed for protection of VIPs, convoys and high-security objects against threats of possible terroristic acts when explosive devices with radio controlled fuses may be used for it.

Frequency range 20...2 750 (6 000) MHz

The device also can be used for jamming cellular, trunked radio and other types of communication links on big squares, stadiums, transportation terminals and so on.

The device receiving unit scans the operating frequency range (20–2750 MHz) with speed 30 THz/sec, then by results of this scanning within time not exciding 10 microseconds, it analysis the received (detected) signal and forms jamming signal that after enhancement by wideband amplifier is emitted through antenna-feeder system to air. Internal structure of jamming signal is similar to the structure of useful signal in which the specially formed distortions are added. Such way of forming jamming signal allows the device efficient operation with any number of radio sources and with any modes of transmitting, such as for instance, frequency hopping mode.

The jammers can be equipped with special additional units for synchronization of transmitting and receiving signals when simultaneous operation of several jammers is necessary for protection of large buildings, big areas, extended convoys and so on (option).

Application of spot jamming allows to generate jamming signal having very high spectral density by power — 5 W at 1 kHz. In order to achieve such high spectral density by using wideband barrage jamming in operating range 20–2750 MHz, the integral output power of such a jammer should be equal to 13 650 W, that is practically unreal.

Special features
  • high performance intellectual digital system for spot reactive jamming countermeasures
  • ultrafast detecting the presence of radio signals for blasting and automatic spot jamming at the detected frequency within device operating frequency range
  • the number of simultaneously transmitted spot jamming signals is not limited
  • automatic optimal distribution of jamming power along operating frequency range (“OptiJam” technology)
  • structural jamming for signals with frequency-time and frequency-code structures
  • device can operate in barrage jamming mode
  • programmable “windows” for operation of own radio communication systems
  • high spectral density by power
  • built-in digital diagnostics system with alarm about malfunction
  • constructional execution is in compliance with military standards
  • it is possible to increase operation frequency range up to 6 GHz (option)
Technical specifications
Frequency range 20...2 750 (6 000) MHz
Average speed of scanning of operation frequency range 30 THz/sec
Jammer response time not more than 10 μs
Maximum spectral density of jamming signal 5 W/kHz
Sensitivity of receiving path in bandwidth 20 kHz 140 dB/W
Continuous operation time from mains supply unlimited
Number of simultaneously transmitted jamming signals unlimited
Vehicle power supply 12 / 24 / 27 V
Mains power supply 220 / 240 V, 50 / 60Hz
Consumed power in jamming mode not more than 650 W
Operational temperature range − 40 ... + 60  °С
Dimensions 635 × 530 × 230 mm
Mass not more than 35,0 kg

Sensitivity of receiving path in bandwidth 20kHz is measured with ratio signal/noise 10 dB. Mass and dimensions are specified without antenna-feeder device. Construction is in compliance with standards MIL STD 810F and IP 65.